Pac-Flex--Premium Alloy Chain Mesh Slings
These slings are specified for multiple lifting uses in metalworking and other applications where the loads are abrasive, hot, or tend to cut other types of slings. Pac-Flex is a uniquely engineered and patented arrangement of alloy steel chain and 1/8” wire rope. End fittings are heat-treated alloy steel. Pac-Flex fills a niche that web slings--and even wire mesh slings--cannot fill. In fact, Pac-Flex is vastly superior in many aspects to the wire mesh sling.
Available in Two Different Styles
Type 1: Choker sling, meaning the sling can be used in all three common hitches--vertical, basket or choker
Type 2: Basket sling, meaning the sling can only be used in vertical or basket hitches (the end fittings cannot pass one through the other)
- Patented combination of alloy steel chain and 1/8" wire rope
- Standard-duty grade features 7/32" chain links
- End fittings made of heat-treated alloy steel
- Flat, smoother bearing surface compared to wire mesh slings
- Flexible…will conform to irregular shapes
- Withstands temperatures up to 400ºF
- Easy to inspect, and easy to repair (each individual component can be repaired or replaced by Liftex as needed)
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.