M-F 8a-5:30p PST |
800-442-7454
Crosby M12-1.75 x 16.90 mm HR-125M Swivel Hoist Ring - 1050 kg WLL - #1016624Image shown may be a stock photo and is for reference only.

Crosby M12-1.75 x 16.90 mm HR-125M Swivel Hoist Ring - 1050 kg WLL - #1016624

Item #:CR-1016624
USUALLY SHIPS:3 - 5 DaysDetails
Price:$266.00
Quantity:
Purchase over $500 of Crosby products and receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Video
  • Safety Notice
  • Crosby M12-1.75 x 16.90 mm HR-125M Swivel Hoist Ring - 1050 kg WLL - #1016624

    • All components are alloy steel, Quenched and Tempered
    • Rated at 100% at 90º angle
    • Individually proof-tested to 2-1/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected
    • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles
    • Marked with a Product Identification Code (PIC) for traceability, top washer is marked with Working Load Limit and recommended torque value
    • 360º swivel and 180º pivot action
    • Satisfies ASME B30.26 requirements
  • MPN
    1016624
    Size
    M12
    Frame Size
    2
    Type
    Standard Metric
    WLL (kg)
    1,050
    Safety Factor
    5:1
    Overall Width
    85.1 mm
    Inside Length
    58.9 mm
    Thread
    16.90 mm
    Bail Size
    17.5 mm
    Approx. Weight (kg)
    1.05
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.