M-F 8a-5:30p PST |
800-442-7454
Crosby AS-1 25 Ton Jaw & Hook Angular Contact Bearing Swivel - 50000 lbs WLL - #1016075Image shown may be a stock photo and is for reference only.

Crosby AS-1 25 Ton Jaw & Hook Angular Contact Bearing Swivel - 50000 lbs WLL - #1016075

Item #:CR-1016075
USUALLY SHIPS:2 - 3 DaysDetails
Price:$5,638.00
Quantity:

  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Crosby AS-1 25 Ton Jaw & Hook Angular Contact Bearing Swivel - 50000 lbs WLL - #1016075

    • Entire swivel is zinc-plated to resist corrosion
    • Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope
    • Designed for high-speed rotation--lower torque required to initiate rotation
    • Quenched and tempered
    • QUIC-CHECK markings are incorporated…Deformation Indicators check for stretch in throat opening and Angle Indicators assist users in lifting within tolerance of load angles
    • Hook is made from forged alloy steel
    • Individually proof-tested at 2 times the Working Load Limit with certification
  • MPN
    1016075
    Model
    AS-1
    Wire Rope Size
    1-1/4"
    Type
    Jaw & Hook
    WLL (tons)
    25
    WLL (lbs)
    50,000
    Safety Factor
    5:1
    Reach (B-B)
    20.88"
    Inside Eye
    -
    Throat Opening
    3.25"
    Jaw Opening
    2.00"
    Pin Diameter
    2.00"
    Approx. Weight (lbs)
    97
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.