The Grillon Hook adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Its Hook connector is ideal for using the lanyard in double mode on the harness side attachment points.
- Lanyard with fine adjustment system for precise work positioning
- Double mode use...on the lateral attachment points of the harness, to distribute the weight on the belt (user has weight on his feet), length is adjusted by pressing on the pivoting cam
- Single mode use...on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops (user is suspended), length is adjusted by operating the handle while holding the free end of the lanyard
- Removable protective sheath protects the rope from abrasive contact and favors smooth rope glide...can be removed when the single lanyard technique is used to bring the user closer to the anchor
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.