M-F 8a-5:30p PST |
800-442-7454
Petzl Zillon Arborist Lanyard - 13 ft (4 m)Image shown may be a stock photo and is for reference only.
Petzl Zillon Arborist Lanyard - 13 ft (4 m)Petzl Zillon Arborist Lanyard - 13 ft (4 m)

Petzl Zillon Arborist Lanyard - 13 ft (4 m)

Item #:PTZ-L22A040
USUALLY SHIPS:2 - 3 DaysDetails
Price:$214.95
Quantity:
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • The adjustable Zillon lanyard is designed for arborist work positioning. It is used doubled, on the harness side attachment points, to distribute the load on the waistbelt. It is easily adjusted with one hand thanks to the progressive locking / unlocking action of the device.

    • It is used doubled, on the harness side attachment points, to distribute the load on the waistbelt
    • Easily adjusted with one hand thanks to the progressive locking / unlocking action of the device
    • Pulley mounted on sealed ball bearings to allow slack to be taken up easily
    • Steel friction elements for increased longevity
    • Replacement ropes available in different sizes
  • Type
    Adjustable
    Material
    Rope
    Length (ft)
    13
    Approx. Weight (lbs)
    1.74
    Approx. Weight (g)
    790
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.