Built with Neodymium magnets and thus compatible with a wide range of metallic materials without the need for electricity. Load capacities from 150 kg / 350 lbs to 2,000 kg / 4,400 lbs. Simple and quick to mount to the lifting equipment thanks to permanently mounted master links. Suitable for flat and round material and as well for temperature ranges from -10ºC to +80ºC at 80 % maximum humidity. Maximum temperature of the load to be lifted: 60 °C.
Surface: orange, anodized and electro galvanized
Master links: orange, powder-coated
Manufactured according to EN 12100 T1 and T2, EN 13155, ASME B30.20 and Machinery Directive 2006/42/EC.
- Built using Neodymium magnets
- No electricity required for use
- Small, compact design makes for easy deployment
- May be used for a wide range of different metals, bearing in mind the reduction factors for Working Load Limits
- Easy to switch on and off by simply turning lever 180º, thus fully leveraging the magnetic effect
- Safety mechanism locks lever in position when the magnet is on, thus preventing the accidental release of the load
- Repair parts available
- 5-year warranty
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.