M-F 8a-5:30p PST |
800-442-7454
Crosby 5/8-11 x 1.20" HR-125C Chain Hoist Ring - 4500 lbs WLL - #1067494Image shown may be a stock photo and is for reference only.

Crosby 5/8-11 x 1.20" HR-125C Chain Hoist Ring - 4500 lbs WLL - #1067494

Item #:CR-1067494
USUALLY SHIPS:3 - 5 DaysDetails
Price:$249.00
Quantity:
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Crosby 5/8-11 x 1.20" HR-125C Chain Hoist Ring - 4500 lbs WLL - #1067494

    • Forged alloy steel
    • Designed to link directly to Grade 80 chain
    • Individually proof-tested to 2-1/2 times the Working Load Limit with certification
    • Yellow chromate finish provides corrosion protection
    • Bolt specification is a Grade 8 Alloy socket head cap screw to ASTM A574
    • 360º swivel and 180º pivot action
    • RFID equipped
  • MPN
    1067494
    Size
    5/8"-11
    Chain Diameter
    9/32" (1/4") - 5/16"
    Type
    Chain
    WLL (lbs)
    4,500
    Safety Factor
    4:1
    Overall Width
    3.35"
    Reach (B-B)
    3.55"
    Thread
    1.20"
    Approx. Weight (lbs)
    2.1
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.