hOpen Now

CM 10 Ton Screwlok Beam Clamp w/ Shackle - #SC9210

CM 10 Ton Screwlok Beam Clamp w/ Shackle - #SC9210
SKU: CM-SC9210MPN: SC9210GTIN/UPC: 043927227372
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 3 - 5 Days
  • This product is rated for overhead lifting.
  • Made in UK

Product Description

Screwlok Beam Clamps are designed for attachment to the lower flanges of structural steel beams to provide a semi-permanent lifting point. The clamps can be quickly and easily attached via the screw-type mechanism.

  • Designed to fit flanges of most structural beams
  • A semi-permanent lifting point for use with manual or electric hoists
  • Shackle incorporated for quick and easy component attachment

* DO NOT side load more than 15º. DO NOT use as a lifting device--clamp should only be used for suspension or to anchor a hoist.


Yellow / Black
WLL (tons)
WLL (lbs)
Beam Size
3" - 12"
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Be the first to write a review!


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.