hOpen Now

Crosby Western 8" Manila Steel Shell Block - 1" - 1-1/8" Rope - 4 Ton WLL - #702333

Crosby Western 8" Manila Steel Shell Block - 1" - 1-1/8" Rope - 4 Ton WLL - #702333
SKU: CR-702333MPN: 702333
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 1 - 2 Days
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • New-style block with higher Working Load Limit
  • Galvanized steel shell
  • Laser cut sideplate opens for rope insertion
  • Incorporates exclusive bolt-retaining spring to assure no lost bolts, plus utilizes secondary retaining pin
  • Bronze bushing with larger bearing diameter for extended service life
  • Lubricated center pin
  • Utilizes Crosby "N" style hooks with integrated latch (latch kit is replaceable)
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements--importantly, these blocks meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26


Rope Size
1" - 1-1/8"
Sheave Size
Manila Rope Blocks
Galvanized Steel
WLL (tons)
WLL (lbs)
Safety Factor
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.