hOpen Now
W R S
#
v
VIEW CART

Gunnebo GrabiQ 5/8" CGD-16-10 Grade 100 Master Link - 39100 lbs WLL - #589405

Gunnebo GrabiQ 5/8" CGD-16-10 Grade 100 Master Link - 39100 lbs WLL - #589405
Image shown may be a stock photo and is for reference only.
Gunnebo GrabiQ 5/8" CGD-16-10 Grade 100 Master Link - 39100 lbs WLL - #589405
SKU: GN-589405MPN: 589405
PRICE:$264.25
PRICE PER:Each
QUANTITY:
SHARE THIS PRODUCT
Purchase over $500 of Gunnebo Johnson products and use Promo Code: GUNNEBO10 to receive a 10% discount off your order total! *Restrictions may apply
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 3 - 5 Days
  • This product is rated for overhead lifting.
  • Made in Sweden

Product Description

A New & Better Way to Build Chain Slings
GrabiQ is an exciting new family of alloy chain sling components. Chain slings used to be built with many components, each one doing a separate job. That made chain slings heavy, bulky and expensive. With GrabiQ, a single component can perform up to three separate functions. For example, a C-Grab Dual may be used to build a double or quad-leg chain sling, using only 2 or 3 "top-of-the-sling" components. Compare this to an "old style" system, which uses up to 15 separate components!

Fewer Components Means Less Weight
Most of the time, GrabiQ slings will be lighter than traditional chain slings because fewer components are used. And because GrabiQ fittings are made from Grade 100 alloy steel, they have a lifting capacity that is usually 25% higher than Grade 80 chain slings.

Easier Inspections
To properly inspect a chain sling, you must inspect each component. That takes a lot of time, which leads to many users skipping the inspection process altogether. Because GrabiQ slings use fewer components, chain sling inspections are easier to perform, meaning they are more likely to be done on a regular basis (as legally required).

  • Made from Grade 100 alloy steel
  • A unique top-of-the-sling fitting, allows attachment of two legs to master link, with incorporated shortening hooks that can also be used to create chain baskets
  • Shortening hooks are 100% efficient--no extra grab hooks or shortening clutches needed to adjust length of sling legs
  • Use one fitting to create a 2-leg chain sling, or two fittings to create a 4-leg chain sling
  • Less bulk means less weight, less moving parts and typically a lower cost than a similar conventional chain sling
  • Heat number identification allows full product traceability

* These links are meant to be used with Gunnebo's MF, MFX or MFH master links, which have an engineered flat. The "Throat Opening" specification shown for each link refers to the pinned opening toward the top of the link, which slides over the engineered flat on a properly selected master link.

Specifications

MPN
589405
Model
CGD-16-10
Chain Diameter
5/8"
Type
Adjustable
Material
Grade 100 Alloy Steel
WLL (lbs)
39,100
Safety Factor
4:1
Reach (B-B)
8.50"
Throat Opening
0.87"
Weight (lbs)
20.1

Questions & Answers

There are no questions or answers for this item.


Product Reviews

Video


Attachments

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.