hOpen Now
W R S
#

Ultra-Safe Economy Cable Grab - 3/8" - #US-5038E

Ultra-Safe Economy Cable Grab - 3/8" - #US-5038E
SKU: ULT-US-5038EMPN: US-5038E
$149.00
Quantity

 By checking this box, I understand I am placing a pre-order for an out of stock product and agree to the pre-order terms & conditions.
  • USUALLY SHIPS: 1 - 2 Days
  • Made in Canada

Product Description

  • Cam-actuated cable grab, designed to arrest falls and slide freely up and down a 3/8" stainless steel or galvanized cable
  • Cam activates to lock grab onto cable in the event of a fall
  • Connects to chest (sternal) attachment point of full body harness via included carabiner
  • Use only on 3/8" (10mm) cable with Minimum Breaking Strength of 6,000lbs (27 kN)
  • Clean with water and mild soap as needed, wipe dry and then lightly lubricate pivot area with WD-40, or a similar product; wipe away excess oil to prevent transfer of oil to cable
  • Meets OSHA & ANSI Z359.1

Specifications

MPN
US-5038E
Cable Diameter
3/8"
Type
Cable
Weight (lbs)
1.44

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Be the first to write a review!

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.