hOpen Now

1/2" Grade 80 Long Link Galvanized Lashing Chain - 40000 lbs Breaking Strength

1/2" Grade 80 Long Link Galvanized Lashing Chain - 40000 lbs Breaking Strength
Linear Feet:
Linear FootCost per FootSave
10 - 49$7.72-
50 - 499$6.9510%
500 + $6.1021%
  • USUALLY SHIPS: 1 - 2 Days
  • Full Drum Length: 500
  • This product is imported. Country of Origin subject to change.
  • This item is not returnable.

Product Description

  • Grade 80 is alloy steel
  • Long link design allows for many various attachments and fittings to be used, making for a more versatile chain
  • Deck lashing chain is especially suited for log lashing and securing cargo on container ships
  • Hot-dip galvanized for strong corrosion protection


Tie Down / Lashing
Grade 80 Alloy Steel
Length (ft)
Per Foot
Breaking Strength (lbs)
Inside Length
Inside Width
Weight / 100 ft (lbs)

Questions & Answers

1 Question & 1 Answer
from Missouri asked:
June 23, 2019
What is the working load limit for this chain?
1 Answer
Because this chain is designed for a unique application and not for lifting, it does not have a Working Load Limit assigned to it, only a Breaking Strength.  At a minimum, we would recommend a safety factor of 4:1.
Submitted by: WRS on June 25, 2019

Product Reviews

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.