hOpen Now
W R S
#

3/16" Grade 30 Zinc-Plated Chain - 800 lbs WLL

3/16" Grade 30 Zinc-Plated Chain - 800 lbs WLL
SKU: IMP-CH316G30ZP
$9.80
Linear Feet:
Linear FootCost per FootSave
1 - 249$0.98-
250 + $0.8810%
  • USUALLY SHIPS: 1 - 2 Days
  • Full Drum Length: 1,600
  • This product is imported. Country of Origin subject to change.

Product Description

  • Grade 30 (aka Proof Coil)
  • Zinc-plated for corrosion protection
  • NOT FOR OVERHEAD LIFTING

Specifications

Size
3/16"
Type
General Purpose
Material
Grade 30 Proof Coil
Color
Silver
Length (ft)
Per Foot
WLL (lbs)
800
Breaking Strength (lbs)
3,200
Safety Factor
4:1
Inside Length
0.98"
Inside Width
0.30"
Weight / 100 ft (lbs)
40

Questions & Answers

1 Question & 1 Answer
Chuck
from US asked:
September 15, 2019
Would this chain be suitable for a porch swing?
1 Answer
We do not have any specs or technical data to give a firm yes or no, but given the Working Load Limit is 800 lbs, there "should' be enough capacity.  The zinc-plated finish will help prevent corrosion too, but it's not 100% rust-proof.
Submitted by: WRS on September 16, 2019

Product Reviews

Be the first to write a review!

Attachments

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.