hOpen Now

Oregon 18HX Harvester Chain Loop | .404" Pitch | .080" Gauge | 85 DL - #18HX085E

Oregon 18HX Harvester Chain Loop | .404" Pitch | .080" Gauge | 85 DL - #18HX085E
SKU: OR-18HX085EMPN: 18HX085EGTIN/UPC: 036577458210
  • USUALLY SHIPS: 1 - 2 Days

Product Description

Oregon 18HX harvester saw chain is an enhanced version of Oregon's aggressive, durable 18H chain built exclusively for mechanized timber harvesters.

  • Micro Chisel cutters have small-radius working corners for excellent performance and ease of maintenance
  • Patented Chain Steel - Oregon OCS-01 steel is patented and provides greater durability, especially in cold cutting conditions
  • Blued Cutters provide superior corrosion resistance and improved strength
  • Wider kerf for reduced bar binding
  • Larger rivets for reduced chain stretch
  • Improved drive link features include a better drive link hole burnish, reduced stretch and better fatigue life
  • LubriLink tie straps help keep oil where it's needed--on the chain


.404" Pitch | .080 Gauge
OCS-01 Alloy Steel
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.