Simple 3:1 mechanical advantage kit. View table below for details on kit contents.

---

RP111 Pulley	1x	Accepts up to 5/8" Rope, 5-3/4" x 3", 2-3/8" Aluminum Sheave, Bushing, Stainless Sideplates, 8,500 lbs Minimum Breaking Strength (MBS), Weighs 11oz
RP102D Pulley	1x	Accepts up to 5/8" Rope, 6-1/2" x 3-1/4", 2-3/8" Aluminum Sheaves, Bushing, Stainless Axle, 14,000 lbs Minimum Breaking Strength (MBS), Weighs 1.15lbs
BINER2 Carabiner	1x	"D" Locking Steel, 4-1/4" x 2-1/4", 5/8" Gate Opening, 6,000 lbs Minimum Breaking Strength (MBS), Weighs 2.6oz
BINER6 Carabiner	1x	Modified "D" Auto-Locking Steel, 4-1/4" x 2-3/8", 13/16" Gate Opening, 14,600 lbs Minimum Breaking Strength (MBS), Weighs 6.9oz

Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.