hOpen Now
W R S
#

Crosby 1/2" A-342W Alloy Master Link - 7400 lbs WLL - #1014266

Crosby 1/2" A-342W Alloy Master Link - 7400 lbs WLL - #1014266
SKU: CR-1014266MPN: 1014266
  • USUALLY SHIPS: 1 - 2 Days
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Alloy steel--Quenched and Tempered
  • Individually proof-tested with certification
  • Proof-tested with special fixtures sized to prevent localized point loading
  • Forgings have a Product Identification Code (PIC) for material traceability, along with the size, the name Crosby and USA in raised lettering
  • Select sizes designated with “W” have enlarged inside dimensions to allow additional room for sling hardware and crane hook
  • 7/8” - 2” master links are type approved to DNV GLST-E271-2.7-1 Offshore Containers; these Crosby master links are 100% proof tested, MPI and impact tested (the tests are conducted by Crosby and 3.1 test certification is available upon request)
  • Equipped with patented QUIC-CHECK® deformation indicators
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements; importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26


Specifications

MPN
1014266
Model
A-342W
Size
1/2"
Single Leg Chain Diameter
9/32" (1/4") - 5/16"
Double Leg Chain Diameter
9/32" (1/4")
Type
Oval
Material
Grade 100 Alloy Steel
Color
Platinum
WLL (lbs)
7,400
Safety Factor
5:1
Inside Length
5.00"
Inside Width
2.80"
Weight (lbs)
1.3

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Attachments

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.