-
Made in Korea
-
USUALLY SHIPS: 1 - 2 Days
-
This product is rated for overhead lifting.
-
This product is eligible for FREE SHIPPING.
Product Description
Accolift® lever hoists are lightweight and portable with chain-type lever-operated pullers. Increases a worker's efficiency in pulling, lifting, lowering, moving and skidding objects in industrial maintenance, construction and utility company applications. Minimal effort is required to move tons. The short handle and short stroke are designed to operate in tight places. Excellent for stretching cable and fencing, positioning machinery and building components.
Construction Features:
Frame/Side Plate: Rugged, lightweight steel design supports and protects internal gearing. Frame designed to allow load hook to be attached when operator is moving from location to location preventing dragging of the load hook.
Load Lever: Designed and constructed to be easily operated by one person. Can be easily disassembled for maintenance.
Operation: The length of the load chain can easily be adjusted using the free chaining device. This device allows free movement of the load chain through the hoist under no load conditions. Once the chain is attached to the load and the slack
is taken out, the change lever can be set to "up" to engage the hoist and chain will be pulled through the device with each stroke of the lever by the operator. When the operator needs to move the lever hoist to the next required location, the bottom hook assembly can be attached to the hoist body preventing dragging the hook through debris.
Gears: Gearing is cold forged and permanently lubricated for longevity. Gear case cover includes bushings to support pinion shaft and change gears.
Mechanical Load Brake: Weston type multiple disc brake controls load smoothly, holding full capacity loads in any position. Load is not transferred back to handle during handle advancement.
Load Chain: Electric welded alloy steel chain is heat treated for strength and wear resistance. Accurately and uniformly sized
to seat properly in the deep pockets of the load sheaves.
Load Block: The load block supports the load hook permitting hook to swivel 360º under capacity loads. Load block is designed to guide the chain without jamming during normal operation.
Hooks: All hooks are drop forged, heat treated steel with spring type latches. Both hooks rotate 360˚ for easy rigging.
Options: Overload clutch, nickel plated load chain and shipyard hooks.
Specification: Meets ANSI and ASME requirements.
Specifications
Safety Notice
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
