hOpen Now

Crosby M30-3.5 x 65.10 mm HR-1200M Side Pull Hoist Ring - 6250 kg WLL - #1067831

Crosby M30-3.5 x 65.10 mm HR-1200M Side Pull Hoist Ring - 6250 kg WLL - #1067831Crosby M30-3.5 x 65.10 mm HR-1200M Side Pull Hoist Ring - 6250 kg WLL - #1067831Crosby M30-3.5 x 65.10 mm HR-1200M Side Pull Hoist Ring - 6250 kg WLL - #1067831
SKU: CR-1067831MPN: 1067831
QuantityCost per Hoist RingSave
1 - 20$1,213.00-
21 - 45$1,116.008%
46 + $1,031.0015%
  • USUALLY SHIPS: 3 - 5 Days
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Body components are alloy steel, Quenched and Tempered
  • Rated at 100% up to 90º angle
  • Individually proof-tested to 2-1/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles
  • Marked with a Product Identification Code (PIC) for traceability, along with Working Load Limit and name Crosby or "CG"
  • Furnished with Yellow Chromate finish for improved corrosion resistance
  • Utilizes standard Crosby shackles for connection to slings, such as G-209 Screw Pin Shackles (sold separately)
  • RFID equipped


Side Pull Metric
WLL (kg)
Safety Factor
Overall Width
142 mm
Inside Eye
37.3 mm
65.10 mm
Weight (kg)

Questions & Answers

There are no questions or answers for this item.

Product Reviews


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.