Crosby 7/32" S-314A Grade 80 Clevis Sling Hook - 2500 lbs WLL - #1225020
SKU: CR-1225020MPN: 1225020
- USUALLY SHIPS: 1 - 2 Days
- Made in the United States of America!
- This product is rated for overhead lifting.
Product Description
- Forged alloy steel, Quenched and Tempered, load-rated
- Individually proof-tested to 2-1/2 times the Working Load Limit with certification
- Integrated, heavy-duty latch kit included
- Large throat opening with "anti-fouling" design thanks to careful contouring
- Fatigue rated
- Suitable for use with Grade 80 chain
Specifications
MPN | 1225020 |
Model | S-314A |
Chain Diameter | 7/32" |
Type | Slip / Sling |
Material | Grade 80 |
WLL (lbs) | 2,500 |
Safety Factor | 4:1 |
Overall Width | 2.60" |
Reach (B-B) | 2.84" |
Throat Opening | 0.81" |
Weight (lbs) | 0.69 |
Questions & Answers
Product Reviews
Attachments
Safety Notice
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govAlthough Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.