hOpen Now

Crosby 1/4" S-501 Open Swage Socket - #1039021

Crosby 1/4" S-501 Open Swage Socket - #1039021
SKU: CR-1039021MPN: 1039021
  • USUALLY SHIPS: 3 - 5 Days
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Forged from special bar quality carbon steel, suitable for cold forming.
  • Swage socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope
  • Hardness controlled by spheroidize annealing
  • Stamp for identification after swaging without concern for fractures (as per directions in the Wire Rope End Terminations User’s Manual)
  • Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper “After Swage” dimension--before swaging, this provides for an obvious visual difference in the shank diameter--after swaging, a uniform shank diameter is created allowing for a QUIC-CHECK and permanent visual inspection opportunity
  • QUIC-CHECK markings are designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections, it does not eliminate the need to perform standard production inspections which include gauging for the proper “After Swage” dimensions or proof loading

* S-501 Swage Sockets are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope. Hydraulic press with proper dies needed for socket installation. View product specifications for full details on swaging dimensions, die selection and sleeve efficiency ratings.


Wire Rope Size
Open Sockets
Breaking Strength (lbs)
Overall Length
Jaw Opening
Pin Diameter
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Be the first to write a review!



Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.