hOpen Now
View CartCheckout
v
VIEW CART

Crosby AS-7 8.5 Ton Bullet Nose Angular Contact Bearing Swivel - 17000 lbs WLL - #1016649

Crosby AS-7 8.5 Ton Bullet Nose Angular Contact Bearing Swivel - 17000 lbs WLL - #1016649
Image shown may be a stock photo and is for reference only.
Crosby AS-7 8.5 Ton Bullet Nose Angular Contact Bearing Swivel - 17000 lbs WLL - #1016649
SKU: CR-1016649MPN: 1016649
PRICE:$1,763.00
PRICE PER:Each
QUANTITY:
SHARE THIS PRODUCT
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 3 - 5 Days
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Entire swivel is zinc-plated to resist corrosion
  • Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope
  • Designed for high-speed rotation--lower torque required to initiate rotation
  • Quenched and tempered
  • QUIC-CHECK markings are incorporated…Deformation Indicators check for stretch in throat opening and Angle Indicators assist users in lifting within tolerance of load angles
  • Individually proof-tested at 2 times the Working Load Limit with certification

Specifications

MPN
1016649
Model
AS-7
Wire Rope Size
3/4"
Type
Bullet Nose
WLL (tons)
8.5
WLL (lbs)
17,000
Safety Factor
5:1
Reach (B-B)
9.88"
Jaw Opening
1.31"
Pin Diameter
1.00"
Weight (lbs)
14.5

Questions & Answers

There are no questions or answers for this item.


Show Questions & Answers

Product Reviews

Attachments

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.