hOpen Now

28" Single Bit Curved Axe Handle

28" Single Bit Curved Axe Handle
  • USUALLY SHIPS: 1 - 2 Days
  • Made in the United States of America!

Product Description

  • A genuine hickory handle with a clear lacquer finish
  • Includes needed wedge(s) for installation
  • Eye Size: 13/16 x 2-7/16 (3 - 5 lbs)*

* Eye dimensions are approximate and some variation occurs due to the handmade nature of this handle. Some sanding or cutting may be required to get a proper fit. Handles are ordered in batches, and from one batch to the next, the color tone can change significantly. All handles, regardless of color, are ordered as Grade AA, highest quality. However, these handles are not hand-picked and perfect grain orientation is not guaranteed. If you require a hand-picked handle with perfect grain orientation, please call us to place a special order. Such handles come at a higher price from the manufacturer and require special processing.


Single Bit
Handle Length
Weight (lbs)

Questions & Answers

1 Question & 1 Answer
from Las Vegas asked:
May 23, 2019
Is this considered a boys axe handle or will the eye fit a standard size axe head?
1 Answer
No, the boy's axe handle can be seen here.
Submitted by: WRS on May 24, 2019

Product Reviews

6 Reviews
0% (0)
50% (3)
50% (3)
0% (0)
0% (0)
50% Recommend this product (3 of 6 responses)
By Kyler
February 27, 2021
The first one I bought was great. Decent grain orientation, straight, not too fat. Wedge was atrocious though. The second one I got had about 60 degree grain orientation, a terrible wedge, and last but not least the handle itself was warped. If you took a level to the top and bottom there would be about an inch and a quarter sized gap because itís so misshapen
Merchant Response:We're sorry to hear you're unhappy with the handle Kyler. The tough part for us is that the handle manufacturers we work with will not guarantee us flawless handles with perfect grain orientation unless we order handles that way specifically, and then the price practically doubles. We wouldn't be viable anymore as a handle supplier if we had to double our prices. That said, we try to supply the best handles we can, but we cannot offer 100% perfection since itís not guaranteed from the factory, at least not at this price.
  • Feels good in hands
  • Lightweight
  • Inconsistent product
  • Terrible wedges
  • Warped
By Jonathan K.
Chepachet, RI
December 31, 2020
Quality handle but wedge arrived cracked.
  • Straight and strong handle.
  • Broken wedge. Wood quality lacking in wedge material.
Overall Good Handle
October 29, 2020
The handle is on the fat size for what I like but with a little trimming and sanding it worked out fine.
  • Great look
  • Excellent running grain
  • Handle a little fat for my liking
By Gary V.
Little Falls. NY
The Handle was OK
April 3, 2020
The grain was not so good, it was almost 180ļ. They will work but I wouldn't pick them if I was there. Service was fast.
  • Fast service.
  • Poor grain.
Lancaster, KY
Axe Handle
February 19, 2020
Very nice handle at a great price. Dropped one star for the expensive shipping cost. Hard to find one this size locally. Easy transaction and will most likely but from WRS again.
  • Premium handle came with no finish, which is what I wanted.
  • High shipping cost.
By William
West Virginia
September 14, 2018
Wedge saw cut was slightly off center, grain orientation was only OK, the handle was a little thick, and shipping was too high. But this was the only cruiser axe handle I could find that was 28 inches long with full size axe head to fit my antique pickeroon, so I like it! Belt sander took care of the handle shape, everything else I can live with.
  • Available
  • See review

Safety Notice

Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.