hOpen Now

HIT 24" Bench-Mount Hand Swager to 3/16" - #22-BST24

HIT 24" Bench-Mount Hand Swager to 3/16" - #22-BST24HIT 24" Bench-Mount Hand Swager to 3/16" - #22-BST24HIT 24" Bench-Mount Hand Swager to 3/16" - #22-BST24
SKU: HIT-22-BST24MPN: 22-BST24
  • USUALLY SHIPS: 1 - 2 Days
  • This product is imported. Country of Origin subject to change.

Product Description

  • Designed for crimping copper and aluminum oval sleeves and stops
  • Jaws are made of forged alloy steel with heat treatment which assures a tight and clean compression on each crimping
  • The specially designed cutter gives clean and sharp cut on wire rope
  • Mounts quickly and easily to your work bench for repetitive cutting and swaging, and is much easier to use (you get much better leverage with a bench-style swager or cutter)


Bench Mount
Red / Black
Overall Length
Max Cut
Swage Capacity
1/16", 3/32", 1/8", 5/32", 3/16"
Weight (lbs)

Questions & Answers

2 Questions & 2 Answers
from Healy, AK asked:
March 6, 2019
Will the cutter on this tool work properly to cut cable as it should?
1 Answer
Yes and no.  The cutter will indeed cut, but these cutters are not designed for frequent use, and they're not suited well for larger diameters.  We recommend using a dedicated cutter and a dedicated swager if you have a large volume of work.
Submitted by: WRS on March 6, 2019

from West Chicago, IL asked:
July 16, 2018
Will this crimp 1/8" wire rope?
1 Answer
Yes, this swager works with the following cable sizes: 1/16", 3/32", 1/8", 5/32", 3/16".
Submitted by: WRS on July 16, 2018

Product Reviews


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.