M-F 8a-5:30p PST |
800-442-7454
Johnson 5/8" WS-6 Open Wedge SocketImage shown may be a stock photo and is for reference only.

Johnson 5/8" WS-6 Open Wedge Socket

Item #:JN-472377
USUALLY SHIPS:2 - 3 DaysDetails
Price:$192.00
Quantity:
  • This product is eligible for FREE SHIPPING on orders over $199.
  • Made in the United States of America!
  • This product is rated for overhead lifting.
Purchase over $500 of Gunnebo Johnson products and use Promo Code: GUNNEBO10 to receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Gunnebo Johnson open wedge sockets combine positive attachment with optimum versatility.
    Easy-to-change Gunnebo Johnson wedge sockets consist of a C-1040 normalized and tempered cast steel body, a C-1040 cold-finished bar stock pin with cotters and a ductile iron wedge to specific wire rope size. Together, the wedge and body act as a vise which grips the wire rope and locks it in place.

    Gunnebo Johnson wedge sockets may be used with multiple sizes of wire rope.
    To switch from an overhaul ball application calling for a 7/8" wire rope to a block application calling for a 1" rope, it is not necessary to buy a completely new wedge socket. A simple change-out of wedges will suffice. Of the 18 models of wedge sockets offered by Gunnebo Johnson, all can be adapted to at least two sizes of wire rope. In fact, the WS-4 and WS-5 will adapt to three sizes.

    Be sure that the wedge is correct for the wire rope size.
    Each socket manufactured by Gunnebo Johnson has a model number and acceptable rope sizes cast into its body. Each wedge has the rope size and particular socket model it will fit. Wedges are also coded by means of color. Red indicates that the wedge is for the largest size of wire rope stated on its socket. Green indicates that the wedge is for the smallest size of rope stated on its socket. Blue indicates that the wedge is a rope size of 9/16"; black for 7/16".

    When using wedge sockets note that two precautions should be taken.
    1) Make sure that a sudden jolt or impact does not dislodge the wedge. When installing wire rope, always pre-load the wedge with wire rope in place. Check frequently to re-tighten or re-position as necessary.
    2) Make allowance for the crimping effect common with all types of wedge sockets. Experience shows that it will reduce the Working Load Limit (WLL) of a line by approximately 20%.

  • MPN
    472377
    Model
    WS-6
    Wire Rope Size
    5/8"
    Type
    Utility
    Material
    Cast Steel
    Color
    Red
    Overall Length
    8.81"
    Jaw Opening
    1.50"
    Pin Diameter
    1.27"
    Approx. Weight (lbs)
    9
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.