A Puller With Virtually Unlimited Reach
This is one of the most popular comealongs / pullers that we sell. Why? Because it's essentially an unlimited puller in terms of distance. All you need is good, 1/2" 3-strand rope with an eye and hook on the end (preferably a spliced eye instead of a tied knot). With this simple setup, you can pull any distance of 20, 50, 100 or even 600 ft. Yes, you could pull even longer, but your arms might give out first. This puller is great for putting back tension on leaning trees or for retrieving downed game that's a long ways away. And when your rope starts to wear out, you can simply replace it. You can even use multiple sections of rope to achieve extremely long distance pulls. And because this puller is made in the U.S.A. by Maasdam, you know it's a high-quality product you can trust.
How To Buy This Puller
Buy the rope puller all by itself if you already have rope and a hook (just make sure your rope is compatible). Or, buy one of our common kits above that gives you the puller and a spliced section of rope with a hook, all for one low price!
- Made using premium materials and to the same standards as standard cable comealongs
- Use with 1/2" 3-strand polyester or combo rope
- Pull an unlimited length of rope…the rope is not stored on the drum
- Leverage is 10:1
- Hooks made from drop forged steel, safety latches included
- Great for recovering vehicles, moving trailers and boats, handling logs and much more
- Lifetime warranty
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.