M-F 8a-5:30p PST |
Gunnebo GrabiQ 3/8" MG-10-10 Grade 100 Master Link - 8800 lbs WLLImage shown may be a stock photo and is for reference only.

Gunnebo GrabiQ 3/8" MG-10-10 Grade 100 Master Link - 8800 lbs WLL

Item #:GN-589407
USUALLY SHIPS:24hrsDetails
  • This product is rated for overhead lifting.
  • Made in Sweden
Purchase over $500 of Gunnebo Johnson products and use Promo Code: GUNNEBO10 to receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Questions & Answers
  • Product Reviews
  • Safety Notice
  • A New & Better Way to Build Chain Slings
    GrabiQ is an exciting new family of alloy chain sling components. Chain slings used to be built with many components, each one doing a separate job. That made chain slings heavy, bulky and expensive. With GrabiQ, a single component can perform up to three separate functions. For example, a Master Grab serves as the master link, connecting link for the load chain and as the shortening hook for adjustment of the chain (available as "MG" for single leg chains or "MGD" for double leg chains). Building the same chain sling using "old style" components would result in using up to seven top rigging components instead of just one.

    Fewer Components Means Less Weight
    Most of the time, GrabiQ slings will be lighter than traditional chain slings because fewer components are used. And because GrabiQ fittings are made from Grade 100 alloy steel, they have a lifting capacity that is usually 25% higher than Grade 80 chain slings.

    Easier Inspections
    To properly inspect a chain sling, you must inspect each component. That takes a lot of time, which leads to many users skipping the inspection process altogether. Because GrabiQ slings use fewer components, chain sling inspections are easier to perform, meaning they are more likely to be done on a regular basis (as legally required).

    • A unique all-in-one top fitting, combining a master link, connector and shortening hook for a single leg chain sling
    • Integrated cradle chain pocket for shortening leg…no extra grab hook or shortening clutch needed to adjust length of sling leg
    • Less bulk means less weight and typically a lower cost than a similar conventional chain sling
    • Heat number identification allows full product traceability
  • MPN
    Chain Diameter
    Grade 100 Alloy Steel
    WLL (lbs)
    Safety Factor
    Inside Length
    Reach (B-B)
    Inside Width
    Weight (lbs)
  • There are no questions or answers for this item.

  • Gunnebo GrabiQ 3/8" MG-10-10 Grade 100 Master Link - 8800 lbs WLL$101.98
    No reviews yet 
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.