Peerless Security Chain Padlock - #H4920-1200
SKU: PER-H4920-1200MPN: H4920-1200GTIN: 0 44182 01031 0
- USUALLY SHIPS: 1 - 2 Days
- This product is imported. Country of Origin subject to change.
Product Description
- Padlock body is made from Stainless A304 material with a stainless shackle
- The lock body extends up to help protect the shackle from allowing bolt cutters to access it
- Comes with two double notch cut reversible keys that can not be removed unless the lock is closed and secure
View the compatibility chart below to see which of our security chains work with this padlock.
Pewag Galvanized 9/32"
PW-21148Pewag Galvanized 3/8"
PW-13620Pewag Galvanized 1/2"
PW-56847Laclede Lockdown 9/32"
LAC-LDC-932Laclede Lockdown 3/8"
LAC-LDC-038Laclede Lockdown 1/2"
LAC-LDC-012Peerless Blue Hex 7/16"
PER-HEX-716Abus 10KS 3/8"
All SizesAbus 12KS 1/2"
All SizesSpecifications
MPN | H4920-1200 |
Chain Diameter | 3/8" - 1/2" |
Type | Chain |
Color | Silver |
Weight (lbs) | 1.6 |
Questions & Answers
2 Questions &
2 Answers
Christopher
from Bayside, NY asked:
February 18, 2019
I have several questions regarding the Peerless Security Chain Padlock:
1. What is the diameter of the shackle?
2. What is the horizontal clearance within the closed shackle?
3. What metal alloy is the shackle made of?
1 Answer
Please click here and view page two of the PDF attachment which should answer all of your questions.
Submitted by:
WRS
on February 18, 2019
Tayfun
from Germany asked:
June 27, 2018
Can I order this padlock with more keys?
1 Answer
Unfortunately no, this padlock comes pre-packaged and we cannot supply additional keys.
Submitted by:
WRS
on June 27, 2018
Product Reviews
5.0
1 Reviews
5
100% (1)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (1 of 1 responses)
By LARichard
West Coast Florida
Made to Last
September 27, 2019
I haven't tried beating this lock to death with a sledge or cutting it with any tools, but It certainly has held up well in a marine environment. I have 2 that have been on continuous duty on my saltwater jetdock for 2 years. They have a bit of surface rust staining as is typical of most stainless- nothing serious, and the lock mechanism still works flawlessly. I tried 2 of the expensive chain locks and they are so totally rusted I can't get them off.
Attachments
Safety Notice
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govAlthough Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.