hOpen Now

Petzl PRO Pulley - 1/2" Rope - #P46

Petzl PRO Pulley - 1/2" Rope - #P46
SKU: PTZ-P46MPN: P46GTIN/EAN: 3342540100374
  • USUALLY SHIPS: 3 - 5 Days
  • Made in France
Purchase over $300 of Petzl products and use Promo Code: PETZL10 to receive a 10% discount off your order total! *Restrictions may apply

Product Description

Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. The side plate that locks under load, the large-diameter sheave and the very high efficiency sealed ball bearings make a pulley that is well suited for handling heavy loads.

  • Designed for maximum simplicity when setting up hauling or load deviation systems
  • The rope can be easily installed even when the pulley is connected to the anchor
  • The pulley always stays attached to its connector, making it loss-proof
  • Especially suited for handling heavy loads
  • Large diameter sheave mounted on sealed ball bearings for excellent efficiency
  • Sideplate locks when loaded and prevents opening of the pulley during use
  • 95% efficiency
  • Certification(s): CE EN 12278, EAC, NFPA 1983 Technical Use

* Min. Rope Diameter: 7 mm
Max. Rope Diameter: 13 mm


Frame Size
Rope Size
Sheave Size
Single Sheave
Aluminum / Nylon
WLL (lbs)
1,124 (5 kN)
Breaking Strength (lbs)
4,946 (22 kN)
Weight (oz)
Weight (g)

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Be the first to write a review!


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.