Pewag 1/2" (12mm) Security Chain Kit - 4 ft Chain & Laclede Padlock
- USUALLY SHIPS: 1 - 2 Days
- Made in Austria / Imported
Perhaps you've heard of Pewag's now famous "3012" chain. Well, that chain is a traction chain, and while it makes for a very strong and imposing security chain, it is prone to surface rust. It has no rust-prohibitive finish on it, because whatever surface rust accumulates really makes no difference in its service life as a traction chain. But since so many people have adopted 3012 as a security chain, Pewag realized it could be even better with an anti-corrosion finish. It took a few months, but now we finally have this new version of 1/2" security chain by Pewag. Same hardness, same toughness, now with an electro-galvanized finish. You may already be familiar with Pewag's 3/8" Square Case Hardened Security Chain--we literally sell a ton of it. This chain is very similar, except it's 2 mm larger (12 mm or 0.472" to be exact). This makes it beefier and even tougher to cut. But don't worry, if you still want the original 3012 1/2" Black Security Chain, we still offer it.
This Is The Chain You've Been Hearing About
Whether on YouTube (click on the Video tab), a website forum or just word of mouth, you may have already heard about this chain. It's in high demand and available to you right here from Westech Rigging Supply.
What About The Lock?
A true, high-security padlock made to work with square security chain. Its beefy design will certainly be a deterrent to any potential thief. This beefy padlock weighs almost 2.5 lbs. You may not want to put it in your pocket, but you'll be happy to secure your precious equipment with it. The brass lock body is 3 mm thick and hardened to 50 HRC. The shackle / pin is 0.43" and is nickel-plated. The lock also ships with three single sided keys designed to activate the 5-tumbler design, and the keyhole is protected with anti-drill steel. This lock works with 3/8", 7/16" and 1/2" security chain.
- Square, case-hardened links
- Cannot be cut with bolt cutters--square link shape does not allow bolt cutters to get a proper bite, which prevents them from cutting the chain
- Requires tremendous effort to cut, a great theft deterrent
- Electro-galvanized finish for corrosion protection
- Chain Hardness: 62 HRC Min.
- Heavy-duty padlock protects the lock pin from being accessed, forcing a potential thief to deal with the hardened security chain
- Brass lock body is 3 mm thick and hardened to HRC 50 and keyhole features anti-drill protection
* This product is not eligible for any current promotions.
Questions & Answers
If you plan to buy just one lock/kit, or if you want multiple locks/kits where each lock takes a different key, then choose locks that are "Keyed Different". If you want to buy multiple locks/kits (perhaps for use at one facility) and you want all locks to take the same key, then choose "Keyed Alike".
The chafe sleeve is a sort of Cordua/Ballistic Nylon material, tough, wears very well.
If you plan to buy just one kit, or if you want multiple kits where each lock takes a different key, then choose locks that are "Keyed Different". If you want to buy multiple kits (perhaps for use at one facility) and you want all locks to take the same key, then choose "Keyed Alike".
The chafe sleeve is a sort of Cordura/Ballistic Nylon, very tough, wears quite well.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.