What Kind Of Chain Is This?
This is Pewag's original design for security chain, which we have been selling for years now. It is surface hardened to 62 HRC Min. which makes it very hard to cut. This chain is in the "sweet spot" in terms of size and toughness, being much bigger than the 9/32" chain yet noticeably smaller than the 1/2" 3012 chain. This chain is extremely hard to cut (check out our YouTube videos) and works well for all kinds of equipment whether on the jobsite or at home. For urban environments, you may want to check out the smaller 9/32" size (think bicycles).
How Is This Chain Different From The 3012 Chain?
For starters, the 3012 chain is actually a traction chain that was not originally designed for security--that does not make it any less formidable, however. The 3012 chain is also bigger at 12 mm in diameter. While this 3/8" chain is hardened 10% deep, the 3012 chain is hardened 6% deep. From a cosmetic perspective, this chain is silver while the 3012 chain is black.
What About The Lock?
A true, high-security padlock made to work with square security chain. Its beefy design will certainly be a deterrent to any potential thief. This beefy padlock weighs almost 2.5 lbs. You may not want to put it in your pocket, but you'll be happy to secure your precious equipment with it. The brass lock body is 3 mm thick and hardened to 50 HRC. The shackle / pin is 0.43" and is nickel-plated. The lock also ships with three single sided keys designed to activate the 5-tumbler design, and the keyhole is protected with anti-drill steel. This lock works with 3/8", 7/16" and 1/2" security chain.
- Square, case-hardened links
- Cannot be cut with bolt cutters…square link shape does not allow bolt cutters to get a proper bite, which prevents them from cutting the chain
- Requires tremendous effort to cut, a great theft deterrent
- Electro-galvanized finish for corrosion protection
- Surface Hardness: 62 HRC Min. | 750 HV10
- Heavy-duty padlock protects the lock pin from being accessed, forcing a potential thief to deal with the hardened security chain
- Brass lock body is 3 mm thick and hardened to HRC 50
- 5-tumbler design with anti-drill protection for keyhole
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.