hOpen Now

Pewag M36 PLGW 7T Gamma Lifting Point - 7000 kg WLL - #91760

Pewag M36 PLGW 7T Gamma Lifting Point - 7000 kg WLL - #91760
SKU: PW-91760MPN: 91760
  • USUALLY SHIPS: 3 - 5 Days
  • This product is rated for overhead lifting.
  • Made in Austria
Purchase over $500 of Pewag products and use Promo Code: PEWAG10 to receive a 10% discount off your order total! *Restrictions may apply

Product Description

Pewag introduces a worldwide innovation to the market: a patented tool-free lifting point. Pewag has raised the bar by designing a lifting point for tool-free anchorage, which can be tightened and aligned manually in the direction of the load. It rotates a full 360º--much like a swivel hoist ring, but far more economical--and contains a patented and interchangeable special screw, which is 100% crack-tested as well as covered with a chrome VI-free finish-protection against corrosion and marked with WLL and thread size. Each lifting point is marked with an individual serial number that allows full product traceability. A reference table with load capacities depending on the different methods of lifting, number of legs and angle of inclination is a part of the user manual and packed together with each lifting point.

  • Patented no-tool design, each lifting point can be hand-tightened
  • Once installed and secured, lifting point rotates freely
  • Center screw is 100% crack-tested
  • Each unit is marked with the WLL and thread size, and is also marked with an individual serial number

* Working Load Limit (WLL) shown is for single leg, inline loading only. Please refer to full product specification sheet for all angular load calculations and full product dimensions.


Grade 100 Alloy Steel
WLL (kg)
Safety Factor
Overall Width
132 mm
55 mm
Bail Size
31 mm
Weight (kg)

Questions & Answers

There are no questions or answers for this item.

Product Reviews



Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.