hOpen Now

Phoenix Pole Pruner Head

Phoenix Pole Pruner Head
SKU: PH-40400MPN: 40400
  • USUALLY SHIPS: 1 - 2 Days

Product Description

  • One of the lightest, most compact pruner head available
  • Fits all standard 1-1/4" poles
  • Durable, commercial-grade design with a stout cutting capacity of 1-3/4"
  • Armature design makes cutting the most difficult tree limbs a snap
  • High carbon steel blade
  • Heavy-duty aircraft quality spring
  • Plated steel parts to protect from rust
  • Replacement parts available


Pruner Heads

Questions & Answers

1 Question & 1 Answer
from California asked:
February 4, 2018
Is the pole socket on this trimmer head threaded to screw onto a threaded pole? Or is it cross drilled to put a bolt or screw through?
1 Answer
The latter. These are installed by drilling through the pole head and inserting a bolt. Many prefer to insert a wooden dowel and drill though it to strengthen the entire area.
Submitted by: Westech Rigging Supply on February 5, 2018

Product Reviews

Be the first to write a review!


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.