hOpen Now

Crosby IP IPH10/J 9 Ton Horizontal Lifting Clamp - #2703536

Crosby IP IPH10/J 9 Ton Horizontal Lifting Clamp - #2703536
SKU: CR-2703536MPN: 2703536

 By checking this box, I understand I am placing a pre-order for an out of stock product and agree to the pre-order terms & conditions.
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 1 - 2 Days
  • This product is rated for overhead lifting.
  • Made in The Netherlands

Product Description

  • For the horizontal lifting and transfer of non-sagging material, to be used in pairs or more (minimum of two clamps per lift)
  • Welded alloy steel body for strength and a small frame size, with forged alloy components where it matters most
  • Individually proof-tested at 2 times the Working Load Limit with certification--serial number and test date stamped into body
  • NEW FEATURES: 1) Magnets ensure the clamps remain in the proper position on the plate and 2) A handle and torsion spring that combine to make the placing of the clamp onto the plate quick, easy and safe
  • Repair kits available
  • Made in an ISO 9001 facility
  • RFID equipped for complete, modern traceability

* Because these clamps must be used in pairs (a minimum of two clamps per lift), the Working Load Limit shown above is based on one pair, not per piece. The rating per clamp is half of the Working Load Limit shown here. Click on the Attachments tab to see a specification sheet for further information.


Horizontal Clamps
WLL (tons)
WLL (lbs)
Inside Eye
Jaw Opening
2.38" - 4.75"
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.