hOpen Now

Crosby IP IPU10 2 Ton Lifting Clamp - #2701677

Crosby IP IPU10 2 Ton Lifting Clamp - #2701677
SKU: CR-2701677MPN: 2701677
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 1 - 2 Days
  • This product is rated for overhead lifting.
  • Made in The Netherlands

Product Description

  • For vertical lifting, turning and transfer, plus a hinged hoisting eye that allows the clamp to lift from practically and direction and helps to avoid side-loading
  • Welded alloy steel body for strength and a small frame size
  • Forged alloy components where it matters most
  • Individually proof-tested at 2 times the Working Load Limit with certificationůserial number and test date stamped into body
  • Full 180º turning range for material transfer, turning or moving
  • Latch locks clamp either open or closed
  • Repair kits available
  • RFID equipped for complete, modern traceability


Vertical Clamps
WLL (tons)
WLL (lbs)
Overall Length
Inside Eye
Jaw Opening
0.00" - 1.38"
Weight (lbs)

Questions & Answers

1 Question & 1 Answer
from Pittsburgh asked:
December 12, 2019
Am I able to get a repair kit for an IPU10 2 Ton lifting clamp part number 2701677 and what all is included?
1 Answer
Yes, please see the repair kit at this link, and there is a breakdown of the parts as well.
Submitted by: WRS on December 12, 2019

Product Reviews

Be the first to write a review!



Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.