M-F 8a-5:30p PST |
800-442-7454
Renfroe LHC 1/2 Ton Horizontal Lifting ClampImage shown may be a stock photo and is for reference only.

Renfroe LHC 1/2 Ton Horizontal Lifting Clamp

Item #:REN-LHC012
USUALLY SHIPS:2 - 3 DaysDetails
Price:$292.50
Quantity:
  • Made in the United States of America!
  • This product is rated for overhead lifting.
  • This product is not eligible for free shipping.


  • Product Description
  • Specifications
  • Attachment(s)
  • Product Reviews
  • Safety Notice
  • The LHC Model is a horizontal lifting clamp intended to be used in pairs, sets of pairs or in a tripod arrangement for transporting steel plates horizontally. The clamp is designed to lift individual sheets horizontally. Cam operations ensure a tight grip on the load. Serrated gripping cam bites into load for positive grip. Clamps rest in position on edge of plate until tension is applied to the load sling. Clamps must be used in single pairs (2), double pairs (4), or tripod (3) configuration with a lifting sling.

  • MPN
    LHC-00.50-A
    Model
    LHC
    Type
    Horizontal Clamps
    WLL (tons)
    1/2
    WLL (lbs)
    1,100
    Overall Width
    4.88" x 7.75"
    Overall Height
    9.25"
    Inside Eye
    1.38"
    Jaw Opening
    0.00" - 2.00"
    Weight (lbs)
    14
  • Renfroe LHC 1/2 Ton Horizontal Lifting Clamp$292.50
    No reviews yet 
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
  • Because these clamps must be used in pairs (a minimum of two clamps per lift), the Working Load Limit shown above is based on one pair, not per piece. The rating per clamp is half of the Working Load Limit shown here. Click on the Attachments tab to see a specification sheet for further information.