hOpen Now

5/8" Hammerhead Rafting Dog

5/8" Hammerhead Rafting Dog
Image shown may be a stock photo and is for reference only.
5/8" Hammerhead Rafting Dog
  • USUALLY SHIPS: 1 - 2 Days
  • This product is imported. Country of Origin subject to change.

Product Description

  • Used for hammering to log to create a grab / pick point
  • Made from forged steel


Overall Length
Inside Eye
Weight (lbs)

Questions & Answers

1 Question & 1 Answer
from Anchorage, AK asked:
January 9, 2018
Your photo shows the size as 5/8". What does that number apply to specifically? Is this the diameter of the ring portion of the "Dog?" How long is the embedding shaft spike? What is the overall length of the device?
1 Answer
The 5/8" call out is in reference to the ring of material that forms the eye. The inside diameter of the eye is 1-3/8". The overall length of the device is 6.5" and the spike portion--from the tip of the spike to where it starts to bevel--is about 2-7/8". Bear in mind these measurements are based on current stock, and when fresh inventory comes in one might see slight variations in design. It depends on the pattern being used by the given mill at the time of purchase.
Submitted by: Westech Rigging Supply on January 10, 2018

Product Reviews

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.