The HR-125 Hoist Ring is specifically designed to be used in vertical lifting applications and offers a high degree of strength and reliability. It is made from alloy steel and is capable of rotating 360°, allowing for easy alignment with the load and reducing the risk of twisting or tangling of the lifting sling.

Here are some key features and characteristics of the Crosby HR-125 Hoist Ring:

• Available in UNC and Metric thread sizes (Red Cap = UNC | Silver Cap = Metric)
• UNC threads available in sizes from 800 pounds to 100,000 pounds Working Load Limit (WLL), with a design factor of 5:1
• Metric threads available in sizes from 400kg to 16,900kg and dual rated in both a 4:1 and 5:1 design factor
• All components are alloy steel - Quenched & Tempered
• Designed to be used at full WLL within angular loading range
• 100% individually proof tested to 2-1/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected (can be furnished 100% Magnetic Particle inspected when requested at time of order, extra charges apply)
• Each product has a Product Identification Code (PIC) for material traceability along with a Working Load Limit and the name Crosby or “CG” stamped into it
• 360° swivel and 180° pivot action
• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
• Individually packaged along with proper application instructions and warning information
• Bolt is secured with E-clip, threads are grooved; this allows for easy disassembly and assembly of hoist ring for thorough examination of all components
• Replacement kits are available
• Bolts are individually Proof Tested
• Multiple bolt length available to meet specific application requirements
• Zinc plated (yellow chromate) finish for increased corrosion protection
• Meets or exceeds all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements; importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26