hOpen Now

Fusion Optimus Manual Rope Grab - 5/8"

Fusion Optimus Manual Rope Grab - 5/8"
SKU: FUS-FP-7103MPN: FP-7103G-LG
  • USUALLY SHIPS: 1 - 2 Days

Product Description

  • Simple, manual operation with mobile ring
  • Release to move along
  • Ideal for rooftop work and climbing / slope operations
  • Designed for use with 5/8" rope
  • Meets ANSI Z359.1-92/99 and CSA standards


Rope Size
Breaking Strength (lbs)
5,171 (23 kN)
Weight (lbs)

Questions & Answers

2 Questions & 2 Answers
from VT asked:
February 3, 2019
I have 1/2" climbing rope, will this work or does it have to be 5/8"? If this will not work what would you recommend?
1 Answer
This particular grab is only rated for 5/8" rope, but the #7202 model is rated for both 1/2" and 5/8" rope, plus it is self-tracking.
Submitted by: WRS on February 4, 2019

from Waterville, ME asked:
January 29, 2019
Can this be manually locked into place on the rope to provide a secure, set length, restraint?
1 Answer
Yes and no. This rope grab's default position is locked--it only releases when you manually grab it and open the cam, releasing the teeth. Otherwise, it stays in the "bite" position, and many refer to this style of rope grab as "anti-panic". That said, it does not have an additional, separate locking mechanism.
Submitted by: WRS on January 29, 2019

Product Reviews

Be the first to write a review!

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.