Petzl ASAP Fall Arrester - 3/8" - 1/2" - #B071AA00
Image shown may be a stock photo and is for reference only.
SKU: PTZ-B071AA00MPN: B071AA00GTIN/EAN: 3342540822221
Purchase over $300 of Petzl products and use Promo Code: PETZL10 to receive a 10% discount off your order total! *Restrictions may apply
- This product is eligible for FREE SHIPPING.
- USUALLY SHIPS: 1 - 2 Days
- Made in France
Product Description
With its unique locking system, the ASAP sets the standard in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and follows the user in all his/her movements. In case of shock or sudden acceleration, the ASAP locks on the rope and stops the user. The ASAP may also be combined with an energy absorber to work at a distance from the rope. Equipped with an OXAN TRIACT-LOCK carabiner, it is certified to U.S. and European standards.
- Arrests falls, slides and uncontrolled descents
- Works on vertical or angled rope
- Locks on the rope even if grabbed during the fall
- Moves up or down the rope without any manual manipulation of the device, and is easy to install and remove at any point on the rope
- May be combined with an ASAP’SORBER energy absorbing lanyard to work at a distance from the rope
- Comes with a OXAN TRIACT-LOCK automatic locking carabiner
* The ASAP system may be used with ropes equivalent to the RAY, certified ANSI Z359.15, of 11 to 13 mm, with the ASAP’SORBER 20 and 40 (international version) and ASAP’SORBER AXESS energy absorbers.
Ropes normally used with the ASAP, that meet the EN 1891 standard, are low stretch kernmantel ropes (elongation less than 5 % with a load of 50 - 150 kg.)
In certain countries, for example the North American countries, the ropes in common use are more static. (Example: RAY 12 mm rope, certified to the ANSI Z359.15 standard, has an elongation of 3 % under a 400 kg load).
Using the ASAP on such static ropes is outside the scope of the EN 12841 and EN 353-2 European certifications.
The ASAP (international version) and ASAP LOCK are certified to the ANSI Z359.15 standard, for use on the RAY 12 mm rope with ASAP’SORBER 20 and 40 (international version) and ASAP’SORBER AXESS energy absorbers.
Specifications
MPN | B071AA00 |
Rope Size | 3/8" - 1/2" |
Type | Rope |
Material | Aluminum / Stainless Steel / Nylon |
Color | Gold |
Weight (lbs) | 1.16 |
Weight (g) | 525 |
Questions & Answers
1 Question &
0 Answers
Les
from Fort Lauderdale, FL asked:
August 9, 2018
Can the PETZL B71AAA ASAP FALL ARRESTER be used on 10mm Stainless steel wire? If not what can be recommended.
Product Reviews
Video
Attachments
Safety Notice
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govAlthough Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.