Compliance with the Department of Transportation's regulations for over-the-road transport of flammables is simpler with Justrite's D.O.T. Compliant AccuFlow Safety Can—ideal for remote gas-fueled equipment.
A hold-down bracket tethered to the spout with an easy-to-grasp tightening screw prevents vapor release and spills during transport as required by D.O.T. This fusible link bracket engages easily when used to transport fuel, and melts at 165ºF (74ºC) preventing dangerous pressure buildup at elevated temperatures. When the fusible link bracket is disengaged, the can acts as a standard safety can and should not be used for transporting fuel. AccuFlow's exclusive Safe-Squeeze trigger mechanism opens the piston-actuated spout and vacuum-release valve for accurate pouring. A release of the handle instantly closes the valve and guards against spills. Built-in safety features include an internal flame arrester to dissipate heat preventing flashback ignition, a leak-tight, self-closing lid automatically venting between 3 and 5 psig (0.2 and 0.35 bar), and heavy roll bars to protect the spout. 1" x 9" hose included.
Meets D.O.T. and HM-181 requirements; has United Nations (UN) approved marking 1A1/Y1.2/100 and is an accepted container under CARB.
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.