hOpen Now

Crosby IP IPSC10 1-1/2 Ton Screw Clamp - #2703857

Crosby IP IPSC10 1-1/2 Ton Screw Clamp - #2703857Crosby IP IPSC10 1-1/2 Ton Screw Clamp - #2703857Crosby IP IPSC10 1-1/2 Ton Screw Clamp - #2703857Crosby IP IPSC10 1-1/2 Ton Screw Clamp - #2703857
SKU: CR-2703857MPN: 2703857
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: 1 - 2 Days
  • This product is rated for overhead lifting.
  • Made in Netherlands

Product Description

The IPSC10 screw style clamp is for positioning, pulling and turning plates or fabrications.

  • Forged alloy steel body for strength and smaller size, with forged alloy components where required
  • Suitable for steel with a surface hardness up to 30 Rc
  • Individually proof-tested at 2 times the Working Load Limit with certification
  • Each product is individually serialized, with the serial number and proof load test date stamped on body
  • Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body
  • Manufactured by an ISO 9001 facility
  • Design Factor based on EN 13155 and ASME B30.20


Screw Clamps
WLL (tons)
WLL (lbs)
Inside Eye
Jaw Opening
0.00" - 1.57"
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Be the first to write a review!


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.