M-F 8a-5:30p PST |
800-442-7454
Crosby 1-1/2" G-2140CT Alloy Bolt Type Anchor Shackle - 30 Ton WLL - #1260801Image shown may be a stock photo and is for reference only.

Crosby 1-1/2" G-2140CT Alloy Bolt Type Anchor Shackle - 30 Ton WLL - #1260801

Item #:CR-1260801
USUALLY SHIPS:3 - 5 DaysDetails
Price:$1,322.52
Quantity:
  • This product is eligible for FREE SHIPPING on orders over $199.
  • Made in the United States of America!
  • This product is rated for overhead lifting.
Purchase over $500 of Crosby products and use Promo Code: CROSBY10 to receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Crosby 1-1/2" G-2140CT Alloy Bolt Type Anchor Shackle - 30 Ton WLL - #1260801

    • Forged - Quenched and Tempered, alloy steel
    • Working Load Limit permanently shown on shackle
    • Finish is inorganic zinc primer
    • Individually proof-tested to 2 times the Working Load Limit and mag inspected with certification
    • RFID equipped
    • Type Approval and certification in accordance with DNV 2.7-1 Offshore Containers, and Rules for Certification of Lifting Appliances, DNV OS-101 and are produced in accordance with DNV MSA requirements, including required documents
    • COLD TUFF shackles are suitable for use to -50º F
  • MPN
    1260801
    Model
    G-2140CT
    Size
    1-1/2"
    Type
    Bolt Type Anchor
    WLL (tons)
    30
    WLL (lbs)
    66,000
    Safety Factor
    5.4:1
    Overall Length
    10.00"
    Inside Length
    5.75"
    Inside Width
    3.88"
    Throat Opening
    2.38"
    Pin Diameter
    1.63"
    Approx. Weight (lbs)
    20.8
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.