M-F 8a-5:30p PST |
Crosby 3-1/2" G-2130 Bolt Type Anchor Shackle - 120 Ton WLL - #1019739Image shown may be a stock photo and is for reference only.

Crosby 3-1/2" G-2130 Bolt Type Anchor Shackle - 120 Ton WLL - #1019739

Item #:CR-1019739
USUALLY SHIPS:3 - 5 DaysDetails
  • Made in the United States of America!
  • This product is rated for overhead lifting.
  • This product is either heavy, oversized, or is subject to dimensional weight shipping charges.
  • This product is not eligible for free shipping.
Purchase over $500 of Crosby products and use Promo Code: CROSBY10 to receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Video
  • Safety Notice
  • Crosby 3-1/2" G-2130 Bolt Type Anchor Shackle - 120 Ton WLL - #1019739

    • Forged - Quenched and Tempered, with round head bolts with welded handles
    • Working Load Limit permanently shown on shackle
    • Hot-dip galvanized
    • Fatigue rated
    • Satisfies ASME B30.26 requirements
    • Individually proof-tested to 2 times the Working Load Limit with certification
    • Magnetic particle inspected with serialized pin and bow
  • MPN
    Bolt Type Anchor
    WLL (tons)
    WLL (lbs)
    Safety Factor
    Overall Length
    Inside Length
    Inside Width
    Throat Opening
    Pin Diameter
    Approx. Weight (lbs)
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.