M-F 8a-5:30p PST |
Gunnebo 1-3/8" 855 Bolt Type Anchor Shackle - 13-1/2 Ton WLLImage shown may be a stock photo and is for reference only.

Gunnebo 1-3/8" 855 Bolt Type Anchor Shackle - 13-1/2 Ton WLL

Item #:GN-640000044
USUALLY SHIPS:24hrsDetails
  • This product is eligible for FREE SHIPPING on orders over $199.
  • This product is rated for overhead lifting.
  • Made in Norway
Purchase over $500 of Gunnebo Johnson products and use Promo Code: GUNNEBO10 to receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Safety Notice
  • Gunnebo 1-3/8" 855 Bolt Type Anchor Shackle - 13-1/2 Ton WLL

    • Forged from Grade 6 steel - Quenched and Tempered
    • Marked with manufacturer's ID, Grade, PIC, WLL, Size and CE
    • Bolt is also marked with manufacturer's ID, Grade and PIC
    • Galvanized bow and pin, brown powder coat on bolt
    • Meets Federal Specification RR-C-271, ASME B30.26, EN 13896
    • Manufactured in an ISO 9001 certified plant
    • Can be furnished with certificates (additional charges apply, inquire at time of order)
  • MPN
    Bolt Type Anchor
    WLL (tons)
    WLL (lbs)
    Safety Factor
    Inside Length
    Inside Width
    Throat Opening
    Pin Diameter
    Approx. Weight (lbs)
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.