hOpen Now

Caldwell ST 1/2 Ton Slab Tongs | 6.00" - 10.00" Jaw

Caldwell ST 1/2 Ton Slab Tongs | 6.00" - 10.00" Jaw
SKU: CW-71-1MPN: 71-1
  • This product is eligible for FREE SHIPPING.
  • USUALLY SHIPS: Call for Date
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Designed for lifting dry slabs of concrete, stone, or metal that must be protected from scratching or marring
  • Use in construction work to position slabs
  • The curved pads give proper contact for gripping smooth surfaces and handling a large range of sizes
  • Polyurethane gripping surfaces are standard
  • A manual latch is standard and locks the tong arms for easy placement on the load
  • Complies with ASME standards

* This product is not eligible for any current promotions.


Slab Tongs
WLL (tons)
WLL (lbs)
35.06" - 43.00"
Jaw Opening
6.00" - 10.00"
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews

Be the first to write a review!


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.