hOpen Now

1/8" Aluminum Oval Swage Sleeve

1/8" Aluminum Oval Swage Sleeve
QuantityCost per SleeveSave
1 - 499$0.12-
500 + $0.118%
  • USUALLY SHIPS: 1 - 2 Days
  • This product is imported. Country of Origin subject to change.

Product Description

  • Use to form eyes (aka loops) in wire rope
  • Installs cleanly and easily using an appropriate swaging tool
  • Available in bulk quantities


Wire Rope Size
Aluminum Sleeves
Overall Length
Overall Width
Overall Height
Weight (lbs)

Questions & Answers

1 Question & 1 Answer
from Idaho asked:
July 22, 2019
When making eyes on plastic coated wire rope is it appropriate to remove the plastic on the end to be swaged?
1 Answer
It depends on the application. If it is for something non-critical, like a dog leash, then it's not necessarily a problem and many will leave it on. But if you want full holding power from the sleeve, then yes, it is definitely best to remove the plastic cover first.
Submitted by: WRS on July 22, 2019

Product Reviews

Be the first to write a review!


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.