hOpen Now

Crosby TD92RL 3/8" - 1/2" Torque Drive SpeedBinder - 9200 lbs WLL - #3674490


Crosby TD92RL 3/8" - 1/2" Torque Drive SpeedBinder - 9200 lbs WLL - #3674490
SKU: CR-3674490MPN: 3674490
  • USUALLY SHIPS: 1 - 2 Days
  • Made in the United States of America!
  • This product is not eligible for free shipping.

Product Description

The Ultimate New Product in Load Securement!
Torque drive binders use a portable power drill to secure loads and eliminate the need for repetitive, manual operations common with lever and ratchet binders.SpeedBinders save time ratcheting down and releasing loads. Time saved means more profit!

Extreme edge gear box placement makes this the most versatile binder that SpeedBinders has produced. Grease zerk is standard equipment. You also receive a protection ring for long life (customer installed). Marked and designed to work with 3/8" - 1/2" chain, but you can use this binder with 5/16" chain as well.chain.

The ultimate for the steel hauler, big chain rental companies, construction, excavating, bobcats, and heavy equipment. Two inches longer handle than the standard arm, zinc-coated rings, hooks, and post threads. 24:1 gear reduced.

Long handle, extreme offset to bring the gear set closer to the operator for easier operation. The handle is a reaction bar. Needs to be in contact with the floor or equipment for proper tension retention.

This version is also the preferred model for the rental industry--boom lifts, scissor lifts, JLG rough terrain lifts, bobcats, and excavators.

* This product is not eligible for any current promotions.

How to Operate
  1. Attach the handle to your drill to help curb the rotational forces that you will be applying. It is important to use both hands.
  2. We recommend setting the torque setting (dial on the collar) to seven to start. This gets most chains super tight. Adjust up or down the numerical range to best suit your needs.
  3. Run your slack in on second or third gear (look for the switch on top of the drill) and reduce down to first gear when you feel any hint of the drill pulling down.
  4. As your chain appears to be getting close to the desired tightness, ease on the trigger because you will begin to experience some twisting torque on the drill. This thing is powerful--again, it is important to use both hands.
  5. The use of a 3/8" impact is approved. It is lighter, more manageable, and you can operate with one hand. Please do not use a 1/2" impact; this will void the warranty. The trade-off is that the drill gets the chains tighter, but you will have some twist to counter. The impact is easier to use and will wear the drive bolt a tad quicker. Drive bolts take about five minutes to replace.


Chain Diameter
3/8" - 1/2"
Torque Drive
Black / Gold
WLL (lbs)
Weight (lbs)

Questions & Answers

There are no questions or answers for this item.

Product Reviews


Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.