M-F 8a-5:30p PST |
Crosby 3/8"-16 x 0.58" HR-125UNC Swivel Hoist Ring - 1000 lbs WLL - #1016898Image shown may be a stock photo and is for reference only.

Crosby 3/8"-16 x 0.58" HR-125UNC Swivel Hoist Ring - 1000 lbs WLL - #1016898

Item #:CR-1016898
USUALLY SHIPS:3 - 5 DaysDetails
1 - 20$174.20
21 - 45$160.20
46 + $148.10
  • Made in the United States of America!
  • This product is rated for overhead lifting.
Purchase over $500 of Crosby products and use Promo Code: CROSBY10 to receive a 10% discount off your order total! *Restrictions may apply
  • Product Description
  • Specifications
  • Attachment(s)
  • Video
  • Questions & Answers
  • Product Reviews
  • Safety Notice
  • Crosby 3/8"-16 x 0.58" HR-125UNC Swivel Hoist Ring - 1000 lbs WLL - #1016898

    • All components are alloy steel, Quenched and Tempered
    • Rated at 100% at 90º angle
    • Individually proof-tested to 2-1/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected
    • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles
    • Marked with a Product Identification Code (PIC) for traceability, top washer is marked with Working Load Limit and recommended torque value
    • 360º swivel and 180º pivot action
    • Satisfies ASME B30.26 requirements
  • MPN
    Frame Size
    Standard UNC
    WLL (lbs)
    Safety Factor
    Overall Width
    Inside Length
    Bail Size
    Weight (lbs)
  • There are no questions or answers for this item.

  • Crosby 3/8"-16 x 0.58" HR-125UNC Swivel Hoist Ring - 1000 lbs WLL - #1016898$174.20
    No reviews yet 
  • Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

    Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

    Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.