hOpen Now
W R S
#

Crosby 1" x 12" HG-4037 (RH) Turnbuckle Jaw Fitting Only - 10000 lbs WLL - #1072617

Crosby 1" x 12" HG-4037 (RH) Turnbuckle Jaw Fitting Only - 10000 lbs WLL - #1072617
SKU: CR-1072617MPN: 1072617
$129.25
Quantity
  • USUALLY SHIPS: Call for Date
  • Made in the United States of America!
  • This product is rated for overhead lifting.

Product Description

  • Quenched and Tempered or normalized
  • Hot-dip galvanized steel
  • Forged jaw ends are fitted with bolts and nuts for 1/4 - 5/8", and pins and cotters on 3/4 - 2-3/4" sizes
  • TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY
  • Modified UNJ thread on end fittings for improved fatigue properties
  • Fatigue rated

Specifications

MPN
1072617
Model
HG-4037 (RH)
Size
1" x 12"
Type
Jaw Fitting Only
Material
Galvanized Steel
WLL (lbs)
10,000
Safety Factor
5:1
Overall Length
13.59"
Jaw Opening
1.34"
Pin Diameter
0.88"
Thread
8.06"
Weight (lbs)
4.22

Questions & Answers

1 Question & 1 Answer
Pirooz
from Canada, Ottawa asked:
March 13, 2020
What is the maximum load before its complete failure?  How much force causes fracture?
1 Answer
This fitting has the same safety factor as the complete turnbuckle assembly, which is 5:1.  Take the Working Load Limit (WLL) x the Safety Factor--10,000 x 5 = 50,000 lbs.
Submitted by: WRS on March 14, 2020

Product Reviews

Attachments

Safety Notice

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.