hOpen Now

Viking Flame Resistant (FR) Open Road Surveyor's Vest

Viking Flame Resistant (FR) Open Road Surveyor's Vest
SKU: VK-6165FRMPN: 6165FR
  • USUALLY SHIPS: 1 - 2 Days

Product Description

Not only does this vest look really cool, but it's packed with great features and its heavy-duty design means it is made to last. Lots of pockets make this vest ideal for foresters, geologists, conservation officers and other similar professionals. The two-tone look is really great because the lime and silver really pop against the block body of the vest. Plus, the black color means this vest will hide dirt and grease really well.

  • 100% Cotton FR-treated fabric for comfort and durability (tested in accordance with test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 flame resistance, self-extinguishing for momentary contact with open flame)
  • Built to last heavy-duty brass snaps and grommets (brass grommets on lower front pockets for surveyor tape dispenser)
  • Mesh side vents
  • Dual reflective chest straps
  • Cell / Radio Velcro-sealed pocket and a 14" zippered pack across entire back area, plus a long ruler slot pocket on left back
  • (8) Velcro-sealed pockets--(5) outside; (3) inside
  • Safety D-Ring slot access on back
  • Fully compliant with CSA Z96-15 Class 1, Level 2


Black / Lime / Silver
Weight (lbs)

Questions & Answers

1 Question & 1 Answer
from Los Angeles, CA asked:
October 20, 2021
Can I get this in 4x or 5X?
1 Answer
We do have a few of the 4X size on order, should arrive within a week.  Feel free to call us @ 503-399-7037 and we can help you out.
Submitted by: WRS on October 28, 2021

Product Reviews

6 Reviews
50% (3)
17% (1)
33% (2)
0% (0)
0% (0)
67% Recommend this product (4 of 6 responses)
By Marc
Plainfield, IL
Smaller Than Size Implies
February 19, 2020
I normally wear an XL and 2XL is tight. I have to wear it open over my FR shirt. I can button the buttons but, depending on my movements they pop.
By Paul
Lower Columbia River, OR
A Vest for Those who Work
October 4, 2019
We were looking for a hi-viz vest that doesn't snag, has pockets, and will stand-up to lots of manual labor in lashing marine cargo - namely big, bulky, dirty, heavy items.

These fit the bill - the hi-viz striping stands out, the 'belly rub' dirt stains are not as apparent, and the quality of finished seems, tacked pockets, sturdy material make this vest a home-run when working on the docks. We will be ordering again.
  • Sturdy fabric, design, cut, quality of finish
  • Runs one-size small after they are exposed to water and they dry
By Danny C.
Hereford, TX
Good but Runs Small
July 6, 2019
Item is of good quality but sizes run smaller than expected. Purchased two vests, one XL and one 2XL......the 2XL is for me and I usually wear a 2XL in clothing which is roomy. But this vest is too snug. Should've ordered a 3XL but that one wasn't an option on your online store.
  • Good quality
  • Sizes run small
By Michael
Viking FR Vest
March 18, 2019
Very good. Quality is great!!! Fits good too.
  • Perfect for welding
By Mac
Size Runs Small
February 28, 2019
I ordered the same size as my other vests and the Viking vest is smaller. So order a size bigger than you normally order.
By Jose C.
Great Product
October 18, 2018
This vest is worth every penny. It is very comfortable and serves more than its purpose. I highly recommend this product.
  • Comfortable and stylish

Safety Notice

Although Westech Rigging Supply strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Westech Rigging Supply disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.

Westech Rigging Supply rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Westech Rigging Supply disclaims liability for any misuse or incorrect product selection by our customers.

Rigging and safety gear purchased from Westech Rigging Supply should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.